Description
Etched brass Stepboards LNER 8′ 6″ Bogie
The etch provides the most common size of LNER step boards for use with Gresley 8′ 6″ bogies. Two differing size of end step boards are included.
Remove the components from the fret and clean up any remaining tabs. Fold the steps along the half etched crease line through 90 degrees with the crease line on the inside of the bend. Strengthen the joint with solder as required and then solder or glue the steps into their corresponding positions on the bogie sideframes.
Note: The number of stepboards used varies from prototype to prototype. Check drawings or photographs to determine size & location.
